9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
^
UHP connection (E) (if present)
^
Cable tie (F)
To Fit
IMPORTANT: Fasten the wiring harness correctly so that there is no risk of it chafing or rattling.
NOTE: Spray all the connectors with "Kontakt 61" to prevent verdigris formation. Clean all the grounding points and coat them with Vaseline.
1. Attach the wiring harness. Route the new wiring harness like the old one was routed. Connect the connector housings to the respective component.
In the event of uncertainty, check the wiring diagrams/component lists for the system.
^
Attach the connector housing (D) to the dashboard harness.
^
Attach the connector to the UHP connection (E) (if present).
^
Fit the cable tie (F).