9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Headliner: Service and Repair
Headlining, 4D, US/CA
Headlining, 4D, US/CA
To remove
WARNING: Take care not to damage or loosen the energy absorbers. Damaged or loose energy absorbers must not be refitted. If the occasion
should arise, the entire headlining must be changed. Damaged energy absorbers may impair head protection in case of a collision.
NOTE: Pay attention to cleanliness so that the headlining does not become dirty.
1. Remove the sun visor.
2. Remove the parcel shelf trim.
3. Remove the A-pillar trim.
4. Remove the B-pillar trim.
5. Remove The C-pillar trim.
6. Release the clips attaching the REC (Rear Electrical Centre) wiring harness.
7. Where appropriate:
Remove the LH speaker from the parcel shelf.