9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
6. Fit the bolts to the spring strut tower.
Tightening torque 25 Nm (18 ft. lbs.)
7. Attach the brake pipes to the unit.
Tightening torque: 16 Nm (12 ft. lbs.)
8. B284 LHD: Fit the brake pips to the master cylinder.
9. Attach the connector to the control module.
10. B284 LHD: Fit the heat shield on the brake servo.