9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Hydraulic Assembly: Service and Repair
Hydraulic unit, TCS/ESP, bracket
Important: ESD-SENSITIVE COMPONENT
Earth yourself by touching the car body before plugging in unplugging components. Do not touch the component pins. Read Before removing
a control module before changing a control module.
Important: Scrupulous cleanliness must always be observed during all work with hydraulic components.
To remove
1. Put on 82 93 706 Wing cover.
2. Drain the brake system, see Changing the brake fluid
3. Remove the battery and lower part of battery cover.
4. B284 LHD: Remove the brake servo heat shield (A).
5. Unplug the connector (A) from the control module.