9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
4. Lay the chain on the intake sprocket and lower the chain. Fit the sprocket on the camshaft and insert the bolt.
5. Raise the car.
6. Fit the chain on the crankshaft sprocket and fit the chain guide. Fit the lower bolt.
Tightening torque 10 Nm (7 ft. lbs.)
7. Lower the car.
8. Fit the exhaust sprocket and enter the bolt.
9. Fit the upper bolt. Fit the plug on the cylinder head.
10. Turn the camshaft drive tensioner clockwise with a screwdriver until it engages in the tensioned position.