9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
4. Fit the floor console.
5. Attach the cable for the battery's negative terminal.
6. Carry out Procedure after battery disconnection.
Front Bumper Harness
Front Bumper Harness
Replace
1. Remove the front bumper shell.
2. Remove the cellular block from the bumper shell.
3. Unplug the wiring harness connectors from all components.
4. Carefully remove the wiring harness without damaging cable ties, etc. that are to be refitted.
IMPORTANT: Fasten the wiring harness correctly so that there is no risk of it chafing or rattling.
5. Lay out the new wiring harness the same as the old one and secure it in the same way.
NOTE: Spray all contact surfaces with "Contact 61" to avoid verdigris formation.