9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Fuel Pump Control Unit: Service and Repair
Control Module, Fuel Pump (697)
To remove
1. 4D/5D: Remove the right front seat.
CV: Remove the seat cushion of the rear seat.
2. 4D/5D: Fold up the right corner of the rear carpeting.
3. Lift up the control module slightly and unplug the connector.
IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight
apart to avoid bending the pins.
4. Cut the cable tie holding the control module to the insulation.
To fit
1. Position the control module on the insulation and fit a cable tie.