9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Rear Knuckle: Service and Repair
Steering swivel member
To remove
1. Raise the car.
2. Remove the wheel.
3. Remove the brake caliper:
^
Remove the retaining spring (A) from the brake pad.
^
Remove the protective cover (B).
^
Remove the hydraulic body (C) and suspend it with a hook in the brake pipe holder.
Important
Be careful that the brake pipes do not get damaged.
^
Remove the brake pads.
4. Undo the bolt of the upper suspension arm to gain access to the bolt of the brake caliper holder. Remove the brake caliper holder (A).