9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Fluid Pan: Service and Repair
Valve housing cover
To remove
1. Add the wing cover. Set gear position P and apply the handbrake. Raise the car. If a track lift is used the wheels must be blocked. Remove the
front spoiler shield.
CV: Remove Chassis reinforcement, front subframe, CV
2. Position a container under the car, connect a hose and drain the cooling system.
3. Drain the gearbox oil via the bottom plug. Fit the plug with a new seal. Use protective gloves.
Tightening torque 45 Nm (33 ft. lbs.)
Warning
The oil can be very hot if the car was recently driven. Risk of burn injuries.