9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
Hood Latch Release: Service and Repair
Bonnet-release Cable And Release Lever
To remove
NOTE: To facilitate the installation of a new bonnet-release cable, it is suitable to route a new cable by means of the old cable when it is removed.
1. Open the bonnet and remove the mount for the bonnet-release cable by removing the clamp.
NOTE: To open the bonnet in an emergency, use special tool part no. 8292963.
2. Remove the bonnet-release cable from the bonnet lock by first removing the bonnet lock spring from its attachment and then removing the cable
from the spring lock.
3. Remove the bonnet-release cable from the radiator member by the bulkhead.
4. Open the door on the driver's side.