9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
7. Move the holder for the rain gutter rearwards-downwards and remove them from the rail, one on each side.
NOTE: Holder with anti-vibration spring.
8. Press down the catch at the rear of the slide mechanism and pull it rearwards.
9. Pull out the drive cable to the rear.
10. Remove the wire from the slide mechanism with a small screwdriver (snap-on fastener).
To fit
1. Fit the drive cable to the slide mechanism.
2. Insert the slide mechanism with cable until it snaps into position.
3. Mount the holders for the rain gutter.
4. Mount the anti-vibration spring and lock ring.