9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
CRUISE lamp should go out.
Is the function correct?
NO
-
See: Manual Gearbox/Checking Control Module's Switch Input - II
YES -
See: Manual Gearbox/Check RESUME Function
Checking Control Module's Switch Input - II
Checking Control Module's Switch Input
-
Switch off the engine.
-
Turn the ignition switch to the ON position.
-
Connect BOB (Break Out Box) between CRUISE control module and CRUISE control module female connector.
-
Hold switch in SET position.