9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
3(C) - Cruise control module
B-
The reading should be 0 V.
Checking the Wiring Harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness.
Observe the multimeter, test lamp or diagnostic tool while doing this.
Is the function correct?
NO
-
See: Manual Gearbox/Checking the Switch's Power Supply - II
YES -
See: Manual Gearbox/Checking the Lead From Switch to Control Module - III
Checking the Lead From Switch to Control Module - III
Checking the Lead From Switch to Control Module
Unplug the connector:
-
Switch, cruise control (141)
After performing this procedure See: Manual Gearbox/Checking the Lead From Switch to Control Module - II
Check RESUME Function
Check RESUME Function
-
Put switch to RES/ position.
CRUISE lamp should go on.
Is the function correct?
NO
-
See: Manual Gearbox/Checking Control Module's Switch Input - III
YES -
Continue with the Check RESUME Function