9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
IMPORTANT: The stepping motor is integrated in the cruise control module and the wire to the throttle body is connected directly to the control
module.
-
Switch off the engine.
-
Turn the ignition switch to the ON position.
Is the function correct?
NO
-
See: Automatic Transmission/Diagnostic Procedure - I
YES -
See: Automatic Transmission/Final Check
Diagnostic Procedure - I
Diagnostic Procedure
-
Rectify the fault as described in 'Adjustment/replacement'.
After performing this procedure See: Automatic Transmission/Final Check
Diagnostic Procedure - II
Diagnostic Procedure
-
Adjust gear selector position sensor, see Group 4 'Automatic transmission'.
After performing this procedure See: Automatic Transmission/Final Check
Checking the Wheel Speed Signal
Checking the Wheel Speed Signal
-
Drive forward slowly.