saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Checking the Vacuum Hoses|Page 3442 > < Checking the Vacuum Hoses|Page 3440
Page 2
background image

-

Connect test lamp 86 11 857 to pin 1 of the female connector and a good grounding point.

-

The lamp should light.

Checking The Wiring Harness

Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness.
Observe the multimeter test lamp or diagnostic tool while doing this.

Is the function correct?

NO

-

See: Rectifying the Lead 

YES -

See: Checking The Ground Lead 

Checking The Ground Lead

Checking The Ground Lead

-

Connect test lamp 86 11 857 to pins 1 and 2 of the female connector.

-

Turn the ignition switch to the ON position.

Checking the Vacuum Hoses|Page 3442 > < Checking the Vacuum Hoses|Page 3440