9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
Coat a thin layer of silicon paste, part No. 30 07 895, on the fan control's contact surface against the evaporator. This is important to ensure proper
functioning and normal service life.
IMPORTANT
The aluminium spacer supplied with the fan control must not be used.
3
Fit the fan control in place, checking that its two sleeves enter the holes in the evaporator's mounting surface.
Screw the fan control in place.
4
Refit the protective cover.
5
Refit the glove box.
6
Calibrate the ACC-system by simultaneously pressing the buttons "AUTO" and "OFF".
IMPORTANT
When calibrating, all previous diagnostic trouble codes are erased. Obtain readouts of the stored diagnostic trouble codes before calibrating.