9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
NO
-
Continue with Quick Check
YES -
See: No Communication With the Trionic T5/Checking That the Trionic Control Module Is Active
Rectify the fault.
After performing this procedure See: No Communication With the Trionic T5/Final Check
Checking That the Trionic Control Module Is Active
Checking That the Trionic Control Module Is Active
-
Turn the ignition switch to the ON position.
-
The CHECK ENGINE lamp should go on when the ignition is turned ON.
Is the function correct?
NO
-
See: No Communication With the Trionic T5/Checking Trionic Control Module Power Supply and Ground - I
YES -
See: No Communication With the Trionic T5/Checking the Diagnostic Tool
Checking Trionic Control Module Power Supply and Ground - I
Checking the Trionic Control Module Power Supply and Ground Connection
Is the car equipped with OBDII?
NO
-
See: No Communication With the Trionic T5/Checking Trionic Control Module Power Supply and Ground - II
YES -
Continue with Checking the Trionic Control Module Power Supply and Ground Connection
Unplug the connector.
-
Control module, Trionic OBDII (589)
-
Turn the ignition switch to the ON position.