9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
-
Connect test lamp 86 11 857 to pins 64 and 57 of the control module's female connector.
-
The test lamp should light.
Checking the wiring harness.
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness.
Observe the multimeter, test lamp or diagnostic tool while doing this.
Is the function correct?
NO
-
See: No Contact With Any Bus System/Rectifying the Lead - II
YES -
See: No Contact With Any Bus System/Final Check
Checking the Diagnostic Tool - I
Checking the Diagnostic Tool
-
Check whether DICE can be contacted on another Saab 9-3 using the same diagnostic tool.
Is the function correct?
NO
-
See: No Contact With Any Bus System/Checking the Diagnostic Tool - II
YES -
See: No Contact With Any Bus System/Rectifying the Lead - I
Checking the Diagnostic Tool - II
Checking the Diagnostic Tool