9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
-
Turn the ignition switch to the ON position.
-
Press NIGHT PANEL on the SID.
-
The main instrument unit's odometer display should go out.
Is the function correct?
NO
-
See: The Diagnostic Tool Display "Missing" For One or More Systems/Diagnostic Procedure For the DICE Bus Wiring Harness - II
YES -
See: The Diagnostic Tool Display "Missing" For One or More Systems/Diagnostic Procedure For the DICE Bus Wiring Harness - I
Diagnostic Procedure For the DICE Bus Wiring Harness - I
Diagnostic Procedure For The DICE Bus Wiring Harness
-
The cause of the fault is an open circuit between pin 14 of the DICE and crimp connection J82 (green lead) or between pin 5 of the DICE and
crimp connection J83 (white lead).
-
The diagnostic instrument shows OK when communication starts.
After performing this procedure See: The Diagnostic Tool Display "Missing" For One or More Systems/Final Check
Diagnostic Procedure For the DICE Bus Wiring Harness - II
Diagnostic Procedure For The DICE Bus Wiring Harness