9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
Material
51 25 406 Banjo bolt
81 24 141 Gasket (x2)
93 99 973 Hose with check valve
79 71 864 Cable tie
Electronics or carburetor cleaner safe for use with oxygen sensors (check label for usage guidelines)
Tools
Numeral 8 punch: 02 97 713
This tool can be ordered directly from Kent-Moore at 1-800-345-2233.
Procedure
Before proceeding, check box 85 of the modification identity plate. If the box is not marked, continue as follows.
Vehicles within VIN Serial No. Ranges:
All Viggens: X7000001 - Y7003737
9-3 3D15D: Y2000001 - VIN Y2013566
9-3 CV: Y7000001 - Y7003737
All steps must be carried out.
Vehicles within VIN Serial No. Ranges:
9-3 3D150: Y2013567 - Y2017062
All Viggens: Y7003738 - Y7005097
9-3 CV: Y7003736 - Y7005097
*Perform steps 1-15 only.*
1
Remove the engine cover.
2
Cut off the cable tie securing the check valve to the valve cover.
3
Detach the vacuum hose from the valve cover and the throttle body.
4
Transfer the insulation sleeve from the old hose to the new.
5
Attach the new hose to the valve cover nipple and to the throttle body.
Important
The check valve should be turned so that the flow is directed from the valve cover to the throttle body, see the arrow on the check valve.