9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
The resistance of the sensor is 860 ±90 ohms.
Engine speed is used to:
-
Indicate the engine operating point in conjunction with the engine load. The operating point indicates the values to be used in matrices and tables.
-
Regulate the idling speed.
The crankshaft angle is used to calculate when angle-related functions should be activated, such as ignition, injection and knock detection.
Diagnostics
-
If the crankshaft position sensor is defective during starter motor cranking, diagnostic trouble code P0337 will be generated.
-
If the control module loses track of the crankshaft position while the engine is running, diagnostic trouble code P0336 will be generated.
System reaction to a fault
-
There is no substitute value for the crankshaft position sensor.