9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
-
The test lamp should NOT go on with selector lever in positions P, R and N.
Checking the Wiring Harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness.
Observe the multimeter, test lamp or diagnostic tool while doing this.
Is the function correct?
NO
-
See: Automatic Transmission/Check Pedal Switch and Gear Position Sensor - II
YES -
See: Automatic Transmission/Check Brake Pedal Switch
Checking the Gear Selector Position Sensor's Power Supply
Checking the Gear Selector Position Sensor's Power Supply
-
Connect a jumper lead between pins 3 and 8