9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
Temperature Sensor (Gauge): Service and Repair
To remove
WARNING
Be careful if the engine is hot. The coolant is very hot and it is also easy to get burnt on the exhaust manifold.
1
Open the expansion tank filler cap and release the pressure. Screw the cap back on.
2
Unplug the temperature sensor's connector.
3
Remove the temperature sensor.
To fit
1
Fit the temperature sensor, grease the threads with Molycote 1000 or the equivalent.
Tightening torque: 6 Nm (4.5 lb ft)
2
Plug in the connector.
3
Top up the coolant and check the system for leaks.