9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position Sensor - Trionic T5
The crankshaft position sensor is located at the flywheel end of the engine block.
To remove
1
Remove the engine cover.
2
Remove the turbo delivery pipe and plug the turbo delivery hose.
3
Free the sensor cable by unplugging the connector and removing the clips/cable ties.
IMPORTANT
Note the position of the cable.
4
Detach the cable.
Unscrew the sensor retaining bolt and remove the sensor. Make a note of the position of the sealing ring.
To fit