saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Checking and Adjusting Gear Positions|Page 6298 > < Checking and Adjusting Gear Positions|Page 6296
Page 1
background image

Shifter M/T: Service and Repair
Gear Lever Joint Bushes

Change bushes when there is play in the joint.
1. Remove the selector rod, refer to Gear Lever, Service and Repair

2. Tap out the spacer sleeve using a drift.
3. Remove and change bushes.
4. Fit the spacer sleeve.
5. Fit the selector rod.

Checking and Adjusting Gear Positions|Page 6298 > < Checking and Adjusting Gear Positions|Page 6296