9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
19. Wind with a ratchet handle so that the wire cuts through the adhesive. Move the plastic guard as you cut. Gradually move the reel to obtain a good
angle. An acute angle will cut better. If necessary, use the second reel for support. If you think the wire might break, cease cutting for about 10-15
seconds to allow the wire to work into the adhesive.
20. When the wire begins to cut towards the upper part of the window, fit the protective tool with suction cup between the cutting wire and the metal
roof to protect the interior. Move the reel and the protective tool as the wire is moved.