saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Main Unit Inputs, Outputs, Bus, Ground, Power Supply|Page 8261 > < Main Unit Inputs, Outputs, Bus, Ground, Power Supply|Page 8259
Page 1
background image

Radio/Stereo: Description and Operation
Standard Radio/Radio With RDS/RDS Radio Services

Radio

General

The radio in the audio system is an AM/FM receiver with PLL frequency synthesis for precise station tuning (frequency lock).

The radio is available with or without RDS. The RDS version of the radio is fitted to cars for the EU market. RDS is not used in other markets.

Function

The antenna signal for the radio is supplied from the antenna via a coaxial cable and separate connector (HF connector) to the main unit.

The radio is activated by the RADIO button on the main unit. When the radio is active, information is transmitted to the bus. The SID unit reads the
information on the bus and shows the present setting on the display.

Control functions

1. Presets (1-6) for direct selection of preset radio stations.
2. Band, for selection of frequency band (AM/FM).
3. Manual tuning up/down in frequency band.
4. Automatic station search, up/down in frequency band.
5. Automatic search with storage (AS) of the 6 strongest radio stations on the AM or FM band.
6. RDS on/off.

IMPORTANT

Detailed information of audio system operation is given in the Owner's Manual.

Radio With RDS

Main Unit Inputs, Outputs, Bus, Ground, Power Supply|Page 8261 > < Main Unit Inputs, Outputs, Bus, Ground, Power Supply|Page 8259