9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
1. Fit the operating arm holder with cable.
2. Fit the microswitch on the operating arm holder.
3. Insert the cable in the casing and fit it in the access flap. Make sure that the access flap is in the same upright position as when removing. Fit the
clip on the cable casing.
4. Refit the access flap and tighten the bolts.
IMPORTANT: Check to make sure that the lever to the microswitch functions correctly.
5. Fit the latch and tighten according to markings. Fit the clip.