9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Seat Back: Service and Repair
Upholstery, Backrest
Upholstery, backrest
To remove
1. Remove the front seat from the car.
Remove the seat side panels.
2. Cut off the cable tie securing the plastic cover and remove the cover on the inner side of the seat, 1 screw.
3
Undo the straps holding the backrest upholstery at the bottom.
Unplug the connector under the seat.
Cut the relevant binding tie.
4. Release the bottom edge of the upholstery strips and feed the cables out through the hole.