9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
/l4-2.0l_turbo_(b205)_ho/Page-1850001.png)
Brake Master Cylinder: Service and Repair
Master cylinder
To remove
1. Remove the engine cover.
2. Unplug the connector from the brake fluid reservoir cover.
3. Drain the brake fluid from the brake fluid reservoir. Use special tool 88 19 096 Bleeding equipment.
4. Place a sheet of paper or a cloth under the master cylinder.
5. Remove the lower brake pipe from the master cylinder.
6. Remove the upper brake pipe from the master cylinder.
7. Manual gearbox: Remove the hose from the brake fluid reservoir.
8. Remove the two master cylinder retaining nuts and lift out the master cylinder.
9. Transfer the brake fluid reservoir to the new master cylinder.
To fit
