9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Fit the front exhaust system to the turbo. Lubricate the studs with Molykote 1000 (part no.30 20 271).
Tightening torque: 25 Nm (18.4 lbf ft)
IMPORTANT When fitting the front exhaust system to the turbo, the nuts should be tightened alternately to avoid distorting the flange. The
flange must not abut against the turbo connection flange.
9. Fit the heat shield.
10. Mount the charge air bypass valve with pipe. Fit a new O-ring, lubricated with non-acidic Vaseline.
Tightening torque: 8 Nm (5.9 lbf ft)