9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
2.
Tighten the lock screw of the steering gear shaft.
Tightening torque 24 Nm (18 lbf ft)
3.
Refit the bottom of the panel and the data link connector on the driver's side.
Marking the modification identity plate
On completion of the necessary rectification, box A5 on the modification identity plate must be marked. If the work is carried out by the importer, mark
the box with a "7". If done by the dealer, mark it with an "8".
Standard time/warranty information
See separate information.