saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Clutch Pedal Assembly|Service and Repair|Page 5256 > < Clutch Pedal Assembly|Service and Repair|Page 5254
Page 6
background image

11. Tighten the clutch pedal nut.

Tightening torque 47 Nm (35 ft. lbs.) 

12. Fit the pin and clip to the pedal.

13. Fit the air duct to the side defroster and secure the wiring harness.
14. Fit the pedal switch.
15. Pull back the clutch pedal so that the switch is adjusted to the correct position. If the switch presses the pedal down, there may be malfunctions.

Clutch Pedal Assembly|Service and Repair|Page 5256 > < Clutch Pedal Assembly|Service and Repair|Page 5254