9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
![background image](/saab/9-3_se_hatchback_(9400)/l4-2.0l_turbo_(b205)_ho/Page-3019007.png)
2. Clean the component with Teroson FL cleaner.
3. Mask the component so that only the damaged area is visible.
4. Start by priming the damaged area with two coats of a mixture for surface structuring.
Mixture: 70% Terotex 3000 (white or black)
20% 2K lacquer
Always use 2K lacquer in the mixture to increase durability, even when treating white or black components.
10% Normal hardener (suitable for the lacquer) but not of MS-type.
5. Allow to dry and grind as necessary.
6. Shower carefully with the mixture. If a courser structure is required, decrease the spray pressure and spray from a greater distance or increase the
spray pressure and spray closer if a finer structure is required.