9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
Seat Belt: Service and Repair
Rear Belts
To remove
1
Raise the rear seat both cushions.
2
5-door: Remove the scuff plates on the right and left-hand rear sills (fastened with clips).
3
Remove the seat-belt anchorages on the sides, they are fastened to the side impact protection.
4
Remove the center belt anchorage
5
Remove both the rear head restraints
6
Remove the head restraint mountings from the belt member. Release the catch inside the sleeve with a screwdriver and tap out the mounting from
below.
7
Undo the center cover on the belt member, it is fastened with clips.
8
Remove the lock handle for the 40% section.
9
Remove the right-hand cover and unhook the cable from the lock arm.
10
Remove the belt member release handle and undo the cable from the handle.
11
Undo the left-hand cover on the belt member.
12
Remove the covers from the seat belts.
13
Remove the inertia reel retaining bolts.
To fit