9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
Power Trunk / Liftgate Lock Actuator: Service and Repair
To Remove
Lock Motor, Tailgate
1
Open the tailgate.
2
Remove the tailgate trim (5 clips, 4 bolts).
3
Remove the retainer bolts that secure the lock motor.
4
Remove the expansion rivet that secures the plastic hinge to the tailgate by slightly pressing in the expander pin and pull out the rivet completely.
5
Carefully pull out the lock motor and turn the motor to remove it from the plastic hinge.
To Fit
1
Hook the lock motor onto the plastic hinge and turn in the motor to its original position.
2
Fit the expander rivet that secures the plastic hinge to the tailgate.
3
Tighten the bolts for the lock motor.
4
Fit the tailgate trim.