9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
Air Door Actuator / Motor: Procedures
Air Recirculation Motor, ACC
Removing
1
Remove the glove box.
2
Remove the air duct.
3
Unplug the connector.
4
Remove the recirculation motor from the climate control unit housing by unhooking the locking tongues.
5
Remove the recirculation motor shaft from the wire. The wire is angled at the end and locked across a clip. Use pliers to turn the clip so that the
wire can be removed.
6
Lift out the recirculation motor.
Fitting