9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
![background image](/saab/9-3_viggen_coupe_(9400)/l4-2.3l_turbo_(b235)_ho/Page-2841004.png)
a
Remove the nut that secures the gearshift selector to the gearbox.
b
Remove both bolts that secure the gearshift selector console to the gearbox housing.
16
Fit the front section of the high-pressure pipe.
17
Lubricate the new O-rings with synthetic vaseline and fit them on the pipes by the receiver dryer PAD-connection.
18
Fit the pipes in the PAD-connection by the receiver dryer.
19
Tighten the bolt that secures the pipes to the PAD-connection.
Tightening torque: 9 Nm (6.6 lbf ft)
20
Lubricate an O-ring with synthetic vaseline and fit it in the joint between the front and rear section of the high-pressure pipe.
21
Join the front and rear section of the high-pressure pipe.
Tightening torque: 11 Nm (8.1 lbf ft)
22
Fit the high-pressure pipe in the brackets on the bulkhead and on the wheel housing.
23
Fit the power steering fluid reservoir and tighten the bolt.