9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
Switches, Relays And Components
The location of the relays is given in brackets below the component number.
When the box around the component is drawn with a solid line, the whole component is shown.
When the box around the component is drawn with a broken line, only part of the component is shown.
On some components having a hanging lead, the connector has not been given a separate H number to show that it is part of the component.
The components are designated by a serial number and one or more supplementary letters, which indicates their location and type. The location is
indicated by capital letters, e.g. 298FL, while the type is indicated by lower case letters, e.g. 47a. The following abbreviations are used to indicate
position:
C
= Centre
D
= Driver's side
F
= Front
H
= boot lid (Hatch)
P
= Passenger side
R
= Rear
LH
= Left Hand
RH = Right Hand
Sensors And Monitors
The component symbols for sensors and monitors have been simplified. The connector/output of the sensors is given an internal symbol indicating the
type of output signal and in the other half, a symbol for the type of quantity is shown.
All internal symbols may be used with other components.