Testing and Inspection for Differential Lock Hydraulic Fluid
/l4-2.0l_turbo/Page-54003.png)
5. Fill with fluid up to the edge, use a clean funnel and hose.
6. Fit the level plug (A).
Tightening torque 14 Nm (10.3 ft. lbs.)
7. Lower the car to the floor.
8. Run the engine at idling speed for 60 seconds to distribute the fluid. Switch off the engine.
9. Raise the car.
10. Remove the level plug (A).
11. Fill with fluid up to the edge, use a clean funnel and hose.
12. Fit the level plug (A).
Tightening torque 14 Nm (10.3 ft. lbs.)
13. Lower the car to the floor.
For information on specifications and capacities, see Fluid type and capacity.
