9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
9. Loosen the upper clips on the torsion box for the cable.
10. Remove the soft top support. Close the soft top cover and sixth bow.
11. Open the boot lid.
IMPORTANT: Take care when opening the boot lid when the soft top cover is not locked as there is a risk of damaging the paintwork.
12. Remove the Luggage compartment side trim, CV on the right-hand side.
13. Undo the control module nuts. Lay the control module to one side.
14. Loosen the cable clip.