9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-4497014.png)
Motor, Rear Height Adjustment
Removing
1. Remove the seat.
2. Remove front seat side panel.
3. Remove the seat cushion.
4. Remove the lower clip from the motor.
5. Remove the upper bracket for adjustment shaft.
NOTE: Proceed carefully. The shaft is spring-loaded. Risk of pinching.
6. Remove the motor's lower pivot pin.
7. Unplug the motor.
Fitting
