9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
Muffler: Service and Repair
Rear Silencer, 4WD
Rear silencer, 4WD
To remove
1. Raise the car.
2. Cut the exhaust pipe to the specified measurement - 65 mm on the side to be replaced (A). Cut the pipe perpendicularly. Use 83 95 667 Pipe
cutter/exhaust system.
3. Remove the rear silencer (B).
To fit
1. Clean the cut to remove burrs and dirt.
2. Fit the rear silencer with new rubber mountings (B).