9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
Fuse Block: Removal and Replacement
Underhood Electrical Centre (UEC)
Underhood Electrical Centre (UEC)
Only applies to SE, GB and DE markets: Before replacing a control module the normal fault diagnosis in accordance with WIS must be carried out, and
the Checklist for replacement of control module/electrical centre, UEC must have been worked through.
To remove
Carry out procedures before removing a control module.
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the main fuse box cover.