9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
6. Plug in the connectors to the respective component. If in doubt, consult the wiring diagram/component list of the system in question.
7. Use the guide tabs to fit the cellular block.
8. Fit the front bumper shell.
CV
Wiring Harness, Boot Lid, CV
To remove
1. Open the roof until the soft top protector is on the boot lid.
IMPORTANT: Check that the soft top protector is fully down to avoid paintwork damage in the boot lid.
2. Remove the wiring harness from the cabin: