9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-142004.png)
Tightening torque 2.5 Nm (1.8 lbf ft)
NOTE: Tighten the bolt alternately.
3. Put the assembly in place with the guide pin in the rubber bushing. Make sure the brake pipes are secured in the clips on the MacPherson strut
tower.
4. Fit the bolts to the spring strut tower.
Tightening torque 25 Nm (18 lbf ft)
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector.
5. Attach the connector to the control module.
6. Refit the battery cover and battery.
7. Carry out Procedure after disconnecting the battery.
8. If control module is changed: Carry out the procedure for changing the control module.