9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
-
Thread the wiring harness through the hole in the body and fit the rubber gaiter (I) to the body.
-
Thread the wiring harness for the boot lid through the hole and fit the rubber gaiter (H) in the boot lid.
-
Secure the wiring harness with clips (G).
-
Plug in the connectors for the right-hand inner light cluster (A), the opening handle (B) and the lock motor (D), and secure the lock motor
connector with clips (C), plug in the connector for the high-level brake light (E) and the connector (F) for the left-hand inner light cluster.