9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-2343014.png)
12. Fit the charge air pipe lower bracket.
13. Fit the junction hose on the charge air pipe and tighten the hose clamp.
14. Replace pipe seals in the gearbox. Use 83 90 270 Sliding hammer,87 92 319 Adapter, 3/8" - M10 and 87 92 756 Puller, oil pipe seal, automatic
transmission.
Important
Ensure that the surfaces in the gearbox gasket opening are not damaged.
