9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
5. Fit the new clip (A) to the final drive gear housing.
6. Fit the new hose to the nipple (B).
7. Fit the hose to the clip (C).
8. Lower the car.
Marking the modification identity plate (not US/CA)
After carrying out the procedure, box B1 on the modification identity plate must be marked. From and including M04 the car's Warranty and Service
Book contains the "Table of Modifications". Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8"
if carried out by the dealer.
Fitting the modification identity plate (not US/CA)
Note
A modification identity plate must only be fitted where local directives require the marking of the car.
Fit the campaign plate in accordance with Tis2Web 9-3 (9440) M04 - General - General - Technical data - Plates and labels
Warranty/Time Information
See separate information.