9-5 (9600) L4-2.3L Turbo (2007)
Antenna Amplifier: Service and Repair
Antenna Amplifier (4D)
Antenna Amplifier (4D)
To remove
1. Remove the speaker grille on the right-hand side of the parcel shelf.
2. Remove the sealing strip.
3. Remove the trim on the right-hand C pillar to gain access to the antenna amplifier.
4. Undo all connections to the antenna amplifier.
5. Remove the screws holding the antenna amplifier and remove the unit.
IMPORTANT: Be careful with the contact (4). When undoing the Fuba GO-NOGO HF contact, care is required to ensure that it is done correctly